Vagal Boost instructions
Everything you need to get started with your tENS Vagal Boost: the full instruction booklet, and the three things that catch most people out.
32 pages, 1 MB. Includes safety information in 26 languages.
Three things to know
- Press and hold M for about two seconds to switch on. A quick tap does nothing.
- Press + to at least level 1. Boost wakes at level 0, and if you leave it there it switches itself off after thirty seconds.
- Changing mode resets the level to zero. Press + again every time you change mode.
Your first session
Put a thin layer of the comfort paste from the box (or a drop of water) on both pads. Clip onto the tragus, the small flap at the front of your ear. Plug Boost into your phone, laptop or a USB power bank. Hold M until the display lights up, short-press M until it shows C, the gentlest mode, then press + to level 1. Fifteen minutes is a session. Boost won't stop on its own: hold M to finish.
Samsung phones don't power the Boost. Use a laptop USB-C port or a USB power bank instead. Never use a mains wall charger.
More help
- Ear electrode placement: where the clip goes and how to get good contact.
- Vagal Boost questions and answers: phones, power, comfort and more.
- All instructions
Still stuck? Contact us or email [email protected] and we will walk you through it.